Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styrolution® PS 485N - PS-I - INEOS Styrolution

Check here, which other Styrolution PS datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 试样制备条件 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Styrolution® PS 485N is a high-impact grade of polystyrene for extruded sheets with a matt surface.

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	4	cm³/10min	ISO 1133
温度	200	°C	-
载荷	5	kg	-
熔体密度	935	kg/m³	-
熔体	0.165	W/(m K)	-
熔体的比热	2290	J/(kg K)	-
喷射温度	81	°C	-

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	1650	MPa	ISO 527
屈服应力	23	MPa	ISO 527
屈服伸长率	1.6	%	ISO 527
名义断裂伸长率	35	%	ISO 527
无缺口简支梁冲击强度, +23°C	N	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	140	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	12	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	7	kJ/m²	ISO 179/1eA

热性能	价值	单位	Test Standard
ISO数据
维卡软化温度, B	87	°C	ISO 306
线性热膨胀系数, 平行	100	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB	class	IEC 60695-11-10
Yellow Card 现存	是的	-	-
燃烧性－氧指数	18	%	ISO 4589-1/-2

电性能	价值	单位	Test Standard
ISO数据
相对介电常数., 100Hz	2.5	-	IEC 62631-2-1
相对介电常数., 1MHz	2.5	-	IEC 62631-2-1
介质损耗因子, 100Hz	4	E-4	IEC 62631-2-1
介质损耗因子, 1MHz	4	E-4	IEC 62631-2-1
相对漏电起痕指数	500	-	IEC 60112

其它性能	价值	单位	Test Standard
密度	1030	kg/m³	ISO 1183

试样制备条件	价值	单位	Test Standard
ISO数据
注塑, 熔体温度	220	°C	ISO 294
注塑, 模具温度	45	°C	ISO 294
注塑, 注射速度	200	mm/s	ISO 294

函数

典型数据

加工方法

注塑, 薄膜挤出成型, 异型材挤出成型, 片材挤出成型, 其它挤出成型, 热成型

供货形式

粒料

特殊性能

高冲击韧性的/经抗冲改性的

地区供应

欧洲, 中东/非洲

其他信息

注塑成型

PROCESSING
injection molding, Melt temperature, range: 180 - 260 °C
injection molding, Mold temperature, range: 10 - 60 °C

Polystyrol 485N can be injection moulded at temperatures between 180 and 260°C, and recommended mould temperatures between 10-60°C.

薄膜挤出成型

PROCESSING
Extrusion, Blown film, Melt temperature: 180 - 210 °C
Extrusion, Flat film, Melt temperature: 200 - 240 °C

Extrusion temperatures should not exceed 240°C.

其E烦龀尚

PROCESSING
Extrusion, Pipes, Melt temperature: 180 - 210 °C

E尾募烦龀尚

PROCESSING
Extrusion, Profiles, Melt temperature: 210 °C

板材挤出成型

PROCESSING
Extrusion, Plates, Melt temperature: 200 - 240 °C

Extrusion temperatures should not exceed 240°C.

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.